How do you read a site plan drawing?
Tips on How to Read a Site Plan Find The Title Block. In the bottom right corner of most plans , you’ll find what’s called a title block. Learn the Plan’s Scale. Determine the Orientation of the Plan . Know the Datum Point. Note the Site’s Contours. Locate Existing Structures.
What should be shown on a site plan?
Archeological sites and the location, type, size and height of all existing signage must be indicated on the site plan . The location and use of all proposed building and structures and their distances from property lines and each other must be shown on the site plan .
How do you read blueprints for beginners?
4 Tips for Reading Blueprints Begin with the title block. The title block is the first piece of information you’ll see in construction site plans. Study the plan legend. Find the blueprint’s scale and orientation. Look for notes from the architect.
What are the 6 types of construction drawings?
Below are the different types of construction drawings . 1 Architectural Drawings : This is one of the types of construction drawings . Structural Drawings : Electrical Drawings : Plumbing and Sanitary Drawings : Finishing Drawing :
What are the five phases of construction?
A standard construction project, in general, has following five major life cycle phases: Initiation . Planning . Execution. Performance and monitoring . Closure.
What do the numbers mean on a site plan?
There are quite a few different types of references that can be used, each of which indicates a different type of detail or drawing. The top number typically identifies the drawing / detail / sequence number of the diagram, and the bottom number indicates the sheet number on which it appears.
Who can create a site plan?
Site plans are used by garden designers and landscapers to create garden and landscape designs and to show changes to a property. They are also used by homeowners to plan home improvement projects such as a new pool, garage or deck.
What is the purpose of a site plan?
Site Plans show the layout , design, and construction of buildings, structures, and paving on a site in a way that protects the public’s interest in safety and economy, and protects from some of the possible bad outcomes of site development.
How do I get site plans?
When you bought your home, a copy of the site plan should have been included in the paperwork you received. If you can’t find it in your closing documents, your mortgage lender or title insurance provider may have copies that they can send to you.
How do you draft a site plan?
Prepare a Site Plan Step 1: Determine when a site plan is required. Step 2: Determine property boundaries and lot dimensions. Step 3: Determine the location of structures and other features. Step 4: Draw the plan . Step 5: Check the drawing and make copies.
What is a site layout plan?
A site layout plan , sometimes called a block plan , shows a detailed layout of the whole site and the relationship of the proposed works with the boundary of the property, nearby roads, and neighbouring buildings. Most applications should include both an existing site layout plan and a proposed site layout plan .
How do you read a plumbing plan?
How to Read Plumbing Blueprints Obtain a guide to the plumbing symbols on a blueprint. Spread the blueprint on a table, counter or other flat surface that will allow you to read the entire page at once. Read the schedules that accompany the blueprints . Identify the symbols for major plumbing fixtures such as sinks, showers, bathtubs and toilets.
What do blueprints include?
A complete set of blueprints will include a floor plan, elevation drawings of each side of the structure, basement or foundation plan, including footings and bearing walls, a complete electrical layout, a framing plan, drawings of all plumbing and mechanical systems, cross section drawings of structural elements, a
How do electricians read blueprints?
To read an electrical blueprint , you should, among other things: Be extremely familiar with all symbols and their meanings (some are very similar, but mix up a pre-set resistor and a variable resistor and you’ll be sorry!) Understand the flow of the circuit and how the power will be distributed across the lines.